7.9.1

Managing Material

Test yourself on Managing Material

Test your knowledge with free interactive questions on Seneca — used by over 10 million students.

Managing Material

You will need to plan how much material is required for your project. It is important that you do not waste material as this is bad for the environment but also increases cost of your product.

Cutting materials

Cutting materials

  • Cut materials efficiently to reduce waste.
  • Ensure you cut close to where you have marked out and always to the edge of sheet material/ fabric to save as much of the material/ fabric as possible.
Check, check, cut

Check, check, cut

  • Take into account your tolerance levels and seam allowance so that there is enough to allow you to manufacture the product accurately.
  • Remember the rule: CHECK - CHECK - CUT.
  • Check your marking out twice so you only have to cut once.
Nesting & tessellating

Nesting & tessellating

  • Nesting or tessellating (to tessellate) means to group items together as close as possible to reduce as much waste as possible.
  • This is used a lot when vinyl cutting or laser cutting lots of the same shapes at once.
  • Manufacturers want to reduce waste as much as possible as they want to look after the environment and also reduce costs.
Measuring units

Measuring units

  • Designers across the planet always measure the size of products in millimetres (mm) so that anyone around the world can understand what size the product is.
  • For large pieces we use meters (M).
  • Centimetres (cm) are rarely used as there is more chance of confusion.
SI units

SI units

  • This system of measuring out is referred to as SI units (Systeme International).
  • Sometimes when calculating the area of material centimetres squared (cm2) can be used as it is easier to understand than mm2 or M2.

Managing Material

You will need to plan how much material is required for your project. It is important that you do not waste material as this is bad for the environment but also increases cost of your product.

Marking out materials

Marking out materials

  • A datum point is a point where all the measurements are taken from so the product can be as accurate as possible.
  • It is used a lot for CAD CAM as machines, such as laser cutters, to calculate where they need to cut by using the datum point as a reference point.
Pattern and grain matching

Pattern and grain matching

  • If working with fabric or material with a pattern you will need to consider how it will line up once cut.
  • For example wallpaper needs the pattern lining up with each strip of wallpaper placed on the wall.
  • The same needs to be done with the grain of the wood, if gluing pieces of timber together you would ensure the grain is running in the same direction and is similar to reduce the look of the join.
Jump to other topics
1

Core Technical Principles

1.1

New & Emerging Technologies

1.1.1Industry1.1.2Enterprise1.1.3Sustainability1.1.4People1.1.5Culture & Society1.1.6Environment1.1.7Production Techniques & Systems1.1.8Emerging Technologies & Design1.1.9End of Topic Test - New & Emerging Technologies1.1.10Exam-Style Questions - Emerging Technologies
1.2

Energy Generation & Storage

1.2.1Fossil Fuels & Nuclear1.2.2Renewable Energy1.2.3Energy Storage Systems
1.3

Developments in New Materials

1.3.1Modern Materials1.3.2Smart Materials1.3.3Exam-Style Questions - Smart Materials1.3.4Composite Materials1.3.5Technical Textiles
1.4

Systems Approach to Designing

1.4.1Inputs1.4.2Processes1.4.3Outputs1.4.4Looped Systems
1.5

Mechanical Devices

1.5.1Types of Movement1.5.2Levers1.5.3Linkages1.5.4Rotary Systems1.5.5End of Topic Test - Designing & Mechanical Devices
1.6

Materials Categories

1.6.1Timbers1.6.2Metals & Alloys1.6.3Metals & Alloys 21.6.4Polymers1.6.5Polymer Types1.6.6Textiles1.6.7Textile Types: Fibres1.6.8Textile Types: Weave1.6.9Paper & Boards
1.7

Material Properties

1.7.1Physical & Working Properties1.7.2End of Topic Test - Materials1.7.3Exam-Style Questions - Materials
2

Paper & Board: Specialist Technical Principles

2.1

Selection of Materials

2.1.1Paper & Boards2.1.2Working with Paper & Boards
2.2

Paper & Board: Forces & Stresses

2.2.1Paper & Board: Forces & Stresses2.2.2Cardboard & Paper
2.3

Paper & Board: Ecological & Social Footprint

2.3.1Paper & Board: Ecological & Social Footprint2.3.2Paper & Board: The Six Rs2.3.3Social Issues
2.4

Paper & Board: Sources & Origins

2.4.1Paper & Board2.4.2End of Topic Test - Paper & Board
2.5

Paper & Board: Using Materials

2.5.1Paper & Board: Properties of Materials2.5.2Paper & Board: Modification of Materials2.5.3Paper & Board: Shape & Form
2.6

Paper & Board: Stock Forms, Types & Sizes

2.6.1Paper & Board: Forms2.6.2Paper & Board: Types2.6.3Paper & Board: Sizes2.6.4Paper & Board: Standards Components
2.7

Paper & Board: Scales of Production

2.7.1Paper & Board: Scales of Production2.7.2Exam-Style Questions - Scales of Production
2.8

Paper & Board: Specialist Techniques & Processes

2.8.1Paper & Board: Techniques & Processes2.8.2Paper & Board: Quality Control
2.9

Paper & Board: Surface Treatments & Finishes

2.9.1Paper & Board: Surface Treatments & Finishes2.9.2End of Topic Test - Specialist Techniques
3

Timber: Specialist Technical Principles

3.1

Timber: Selection of Materials

3.1.1Timber Based Materials3.1.2Timber: Environment & Ethics
3.2

Timber: Forces & Stresses

3.2.1Timber: Forces & Stresses3.2.2Timber
3.3

Timber: Ecological & Social Footprint

3.3.1Timber: Ecological & Social Footprint3.3.2Timber: The Six Rs3.3.3Timber: Social Issues3.3.4Exam-Style Questions - Timber
3.4

Timber: Sources & Origins

3.4.1Timber3.4.2Timber: Processing & Seasoning3.4.3Manufactured Board3.4.4End of Topic Test - Timber
3.5

Timber: Using Materials

3.5.1Timber: Properties of Materials3.5.2Timber: Modification of Materials3.5.3Timber: Shape & Form3.5.4Timber: Shape & Form 2
3.6

Timber: Stock Forms, Types & Sizes

3.6.1Timber: Stock Forms, Types & Sizes
3.7

Timber: Scales of Production

3.7.1Timber: Scales of Production
3.8

Timber: Specialist Techniques & Processes

3.8.1Timber: Tools, Equipment & Processes3.8.2Timber: Tools, Equipment & Processes 23.8.3Timber: Quality Control
3.9

Timber: Surface Treatments & Finishes

3.9.1Timber: Surface Treatments3.9.2Timber: Finishes3.9.3End of Topic Test - Specialist Techniques
4

Metal: Specialist Technical Principles

4.1

Metals: Selection of Materials

4.1.1Metal-Based Materials4.1.2Ferrous Metals4.1.3Non-Ferrous Metals4.1.4Alloys4.1.5Metals: Environment & Ethics
4.2

Metals: Forces & Stresses

4.2.1Metals: Forces & Stresses
4.3

Metals: Ecological & Social Footprint

4.3.1Metals: Ecological Footprint4.3.2Metals: Social Footprint4.3.3Metals: The Six R's4.3.4Metals: Social Issues
4.4

Metals: Sources & Origins

4.4.1Origins of Metal4.4.2Processing Metals
4.5

Metals: Alloy-Based Materials

4.5.1Types of Metal Alloys4.5.2Alloying Elements4.5.3Properties & Benefits4.5.4Processing & Fabrication4.5.5Applications of Alloys4.5.6Metal Alloys in Industry4.5.7Applications of Metal Alloys
4.6

Metals: Using Materials

4.6.1Properties of Metals4.6.2Modification of Metals4.6.3Metals: Shape & Form
4.7

Metals: Scales of Production

4.7.1Metals: Scales of Production
4.8

Metals: Specialist Techniques & Processes

4.8.1Metals: Tools4.8.2Metals: Tools & Equipment4.8.3Metals: Cutting, Forming & Machining Processes4.8.4Metals: Joining, Casting & Heat Treatment Process
4.9

Metals: Quality Control

4.9.1Metals: Quality Control4.9.2Metals: Quality Control Processes
4.10

Metals: Surface Treatments & Finishes

4.10.1Metals: Surface Treatments4.10.2Metals: Surface Treatments for Metals4.10.3Metals: Finishes4.10.4Metals: Finishing Techniques for Metals
5

Polymers: Specialist Technical Principles

5.1

Polymers

5.1.1Polymers: Functionality & Aesthetics5.1.2Polymers: Environment & Ethics5.1.3Polymers: Sources, Origins & Properties5.1.4Polymers: Forces & Stresses5.1.5Polymers: Ecological & Social Footprint5.1.6Polymers: The Six R's
5.2

Polymer Categories

5.2.1Categories of Polymers5.2.2Thermoforming Polymers5.2.3Thermosetting Polymers
5.3

Polymer Forms

5.3.1Polymers: Stock Forms5.3.2Polymers: Shape & Form
5.4

Polymer Production, Techniques & Quality Control

5.4.1Polymers: Scales of Production5.4.2Polymers: Specialist Techniques & Processes5.4.3Polymers: Quality Control Systems: Tolerance5.4.4Polymers: Finishes
6

Textiles: Specialist Technical Principles

6.1

Textile Materials

6.1.1Origin of Textiles6.1.2Textile Industry
6.2

Selection of Materials

6.2.1Natural Fibres6.2.2Synthetic Fibres6.2.3Environmental Concerns6.2.4Environmental Impact6.2.5Ethical Challenges
6.3

Forces & Stresses

6.3.1Forces & Stresses
6.4

Ecological & Social Footprint

6.4.1Ecological Footprint6.4.2Social Footprint6.4.3Addressing Ecological & Social Footprints6.4.4The Six R's6.4.5Labour Conditions6.4.6Social Issues6.4.7Addressing Social Issues
7

Designing & Making Principles

7.1

Investigation & Data

7.1.1Iterative Design7.1.2Primary & Secondary Data7.1.3Market Research7.1.4Ergonomics7.1.5Specifications7.1.6End of Topic Test - Investigation & Data7.1.7Exam-Style Questions - Specifications
7.2

Environmental, Social & Economic Challenges

7.2.1Challenges7.2.2Your Research
7.3

The Work of Others

7.3.1Designers7.3.2Architects7.3.3Product Design7.3.4Industrial Designers7.3.5Product Design Companies7.3.6Textile Design Companies7.3.7End of Topic Test - The Work of Others
7.4

Design Strategies

7.4.1Design Strategies
7.5

Communication of Design Ideas

7.5.1Design Communication
7.6

Prototype Development

7.6.1Prototype Development
7.7

Selection of Materials

7.7.1Materials
7.8

Tolerances

7.8.1Tolerances
7.9

Material Management

7.9.1Managing Material7.9.2Tools
7.10

Specialist Equipment

7.10.1Health & Safety
7.11

Specialist Techniques & Processes

7.11.1Specialist Techniques & Processes7.11.2Surface Finishes7.11.3End of Topic Test - Designing & Making

Practice questions on Managing Material

Can you answer these? Test yourself with free interactive practice on Seneca — used by over 10 million students.

  1. 1
    Which rule should you remember before you cut your materials?Multiple choice
  2. 2
    What type of machines commonly use the datum point as a cutting reference point?Multiple choice
Answer all questions on Managing Material

Unlock your full potential with Seneca Premium

  • Unlimited access to 10,000+ open-ended exam questions

  • Mini-mock exams based on your study history

  • Unlock 800+ premium courses & e-books

Get started with Seneca Premium

Tolerances

Tools