Paper & Boards

Paper and Boards

Papers and boards are converted in a paper mill and are made from wood pulp. Other materials or sources can be added to enhance the properties of the paper. These include cotton, where the finished paper is known as rag paper.

Common papers

Common papers have the following characteristics:
- These papers are made in a paper mill from wood pulp.
- Paper is measured by weight in grams per square metre (GSM).

Common types of paper

Common types of paper include:
- Cartridge paper.
- Layout paper.
- Tracing paper.

Common boards

Common boards have the following characteristics:
- These boards are made in a paper mill from wood pulp.
- Paper thickness is measured in Microns or grams per square metre (GSM).
- 1000 microns is equal to 1mm of board thickness. The lower the number the thinner the paper or card.

Common Papers

Papers are commonly used in everyday tasks such as sketching. They could even be used in some of your GCSE projects.

Bleed proof paper

This paper is slightly textured with a white coating.
The paper is ideal for solvent-based markers, as it does not bleed.
The paper weighs approximately 70GSM (grams per square metre).
Commonly used with marker pens for marker rendering design ideas.

Cartridge paper

This paper has a rough surface finish and is slightly thicker.
The paper is completely opaque and more expensive than other papers.
The paper weighs approximately 120-150GSM (grams per square metre).
Commonly used for watercolour, pencil, ink drawings and sketches.

Grid paper

This white paper has a pre-printed grid such as squares, isometric, dots or other patterns.
The paper contains a grid or pattern usually in blue ink.
The paper weighs approximately 80GSM (grams per square metre).
Commonly used for mathematics, graphs, diagrams and layout drawings.

Layout paper

This off-white paper is smooth and slightly translucent.
This paper takes most drawing medium very well.
The paper weighs approximately 40-60GSM (grams per square metre).
Commonly used for sketching, working ideas and tracing images.

Tracing paper

This off-white paper has low opacity and is very translucent.
This paper takes most drawing medium very well.
The paper weighs approximately 40-120GSM (grams per square metre).
Commonly used for copying/tracing images, overlays and is often used with a light box.

Common Boards

Boards are commonly used in everyday tasks such as food packaging. They could even be used in some of your GCSE projects.

Corrugated cardboard

This board usually has a brown finish and are bonded in two parts.
This board is strong, lightweight, easy to print on and a good insulator.
The board measures approximately 1000-5000 microns.
Commonly used for packaging, boxes and takeaway food packaging.

Duplex board

This board has two layers glued together often with a white external layer.
This board is stiff, lightweight and easy to print on.
The board weighs approximately 200-500GSM (grams per square metre).
Commonly used for packaging and given a waxy coating to be used as food and drinks containers.

Foil lined board

This board usually has a white card outer and laminated to an aluminium foil inner.
This board is strong, reflects heat and is water and oil resistant.
The board weighs approximately 200-400GSM (grams per square metre).
Commonly used for takeaway food packaging to retain heat for longer periods.

Foam core board

This board is smooth back and front with a foam middle.
This board is strong, lightweight and available in many colours and thicknesses.
The board measures approximately 3-10mm thick.
Commonly used for displays, architectural models, model making and artwork.

Inkjet card

This board is smooth with a brilliant white finish.
This card is strong, lightweight and available in a number of thicknesses.
The board weighs approximately 120-350GSM (grams per square metre).
Commonly used for high-quality photo prints.

Solid white board

This board is brilliant white and smooth on both sides.
This board is stiff, holds colour well and cuts easily.
The board weighs approximately 200-500GSM (grams per square metre).
Commonly used for greeting cards, packaging, advertising, hot foil stamping and embossing.

1Core Technical Principles

1.1New & Emerging Technologies

1.1.1Industry

1.1.2Enterprise

1.1.3Sustainability

1.1.4People

1.1.5Culture & Society

1.1.6Environment

1.1.7Production Techniques & Systems

1.1.8Emerging Technologies & Design

1.1.9End of Topic Test - New & Emerging Technologies

1.1.10Exam-Style Questions - Emerging Technologies

1.2Energy Generation & Storage

1.2.1Fossil Fuels & Nuclear

1.2.2Renewable Energy

1.2.3Energy Storage Systems

1.3Developments in New Materials

1.3.1Modern Materials

1.3.2Smart Materials

1.3.3Exam-Style Questions - Smart Materials

1.3.4Composite Materials

1.3.5Technical Textiles

1.4Systems Approach to Designing

1.4.1Inputs

1.4.2Processes

1.4.3Outputs

1.4.4Looped Systems

1.5Mechanical Devices

1.5.1Types of Movement

1.5.2Levers

1.5.3Linkages

1.5.4Rotary Systems

1.5.5End of Topic Test - Designing & Mechanical Devices

1.6Materials Categories

1.6.1Timbers

1.6.2Metals & Alloys

1.6.3Metals & Alloys 2

1.6.4Polymers

1.6.5Polymer Types

1.6.6Textiles

1.6.7Textile Types: Fibres

1.6.8Textile Types: Weave

1.6.9Paper & Boards

1.7Material Properties

1.7.1Physical & Working Properties

1.7.2End of Topic Test - Materials

1.7.3Exam-Style Questions - Materials

2Paper & Board: Specialist Technical Principles

2.1Selection of Materials

2.1.1Paper & Boards

2.1.2Working with Paper & Boards

2.2Paper & Board: Forces & Stresses

2.2.1Paper & Board: Forces & Stresses

2.2.2Cardboard & Paper

2.3Paper & Board: Ecological & Social Footprint

2.3.1Paper & Board: Ecological & Social Footprint

2.3.2Paper & Board: The Six Rs

2.3.3Social Issues

2.4Paper & Board: Sources & Origins

2.4.1Paper & Board

2.4.2End of Topic Test - Paper & Board

2.5Paper & Board: Using Materials

2.5.1Paper & Board: Properties of Materials

2.5.2Paper & Board: Modification of Materials

2.5.3Paper & Board: Shape & Form

2.6Paper & Board: Stock Forms, Types & Sizes

2.6.1Paper & Board: Forms

2.6.2Paper & Board: Types

2.6.3Paper & Board: Sizes

2.6.4Paper & Board: Standards Components

2.7Paper & Board: Scales of Production

2.7.1Paper & Board: Scales of Production

2.7.2Exam-Style Questions - Scales of Production

2.8Paper & Board: Specialist Techniques & Processes

2.8.1Paper & Board: Techniques & Processes

2.8.2Paper & Board: Quality Control

2.9Paper & Board: Surface Treatments & Finishes

2.9.1Paper & Board: Surface Treatments & Finishes

2.9.2End of Topic Test - Specialist Techniques

3Timber: Specialist Technical Principles

3.1Timber: Selection of Materials

3.1.1Timber Based Materials

3.1.2Timber: Environment & Ethics

3.2Timber: Forces & Stresses

3.2.1Timber: Forces & Stresses

3.2.2Timber

3.3Timber: Ecological & Social Footprint

3.3.1Timber: Ecological & Social Footprint

3.3.2Timber: The Six Rs

3.3.3Timber: Social Issues

3.3.4Exam-Style Questions - Timber

3.4Timber: Sources & Origins

3.4.1Timber

3.4.2Timber: Processing & Seasoning

3.4.3Manufactured Board

3.4.4End of Topic Test - Timber

3.5Timber: Using Materials

3.5.1Timber: Properties of Materials

3.5.2Timber: Modification of Materials

3.5.3Timber: Shape & Form

3.5.4Timber: Shape & Form 2

3.6Timber: Stock Forms, Types & Sizes

3.6.1Timber: Stock Forms, Types & Sizes

3.7Timber: Scales of Production

3.7.1Timber: Scales of Production

3.8Timber: Specialist Techniques & Processes

3.8.1Timber: Tools, Equipment & Processes

3.8.2Timber: Tools, Equipment & Processes 2

3.8.3Timber: Quality Control

3.9Timber: Surface Treatments & Finishes

3.9.1Timber: Surface Treatments

3.9.2Timber: Finishes

3.9.3End of Topic Test - Specialist Techniques

4Metal: Specialist Technical Principles

4.1Metals: Selection of Materials

4.1.1Metal-Based Materials

4.1.2Ferrous Metals

4.1.3Non-Ferrous Metals

4.1.4Alloys

4.1.5Metals: Environment & Ethics

4.2Metals: Forces & Stresses

4.2.1Metals: Forces & Stresses

4.3Metals: Ecological & Social Footprint

4.3.1Metals: Ecological Footprint

4.3.2Metals: Social Footprint

4.3.3Metals: The Six R's

4.3.4Metals: Social Issues

4.4Metals: Sources & Origins

4.4.1Origins of Metal

4.4.2Processing Metals

4.5Metals: Alloy-Based Materials

4.5.1Types of Metal Alloys

4.5.2Alloying Elements

4.5.3Properties & Benefits

4.5.4Processing & Fabrication

4.5.5Applications of Alloys

4.5.6Metal Alloys in Industry

4.5.7Applications of Metal Alloys

4.6Metals: Using Materials

4.6.1Properties of Metals

4.6.2Modification of Metals

4.6.3Metals: Shape & Form

4.7Metals: Scales of Production

4.7.1Metals: Scales of Production

4.8Metals: Specialist Techniques & Processes

4.8.1Metals: Tools

4.8.2Metals: Tools & Equipment

4.8.3Metals: Cutting, Forming & Machining Processes

4.8.4Metals: Joining, Casting & Heat Treatment Process

4.9Metals: Quality Control

4.9.1Metals: Quality Control

4.9.2Metals: Quality Control Processes

4.10Metals: Surface Treatments & Finishes

4.10.1Metals: Surface Treatments

4.10.2Metals: Surface Treatments for Metals

4.10.3Metals: Finishes

4.10.4Metals: Finishing Techniques for Metals

5Polymers: Specialist Technical Principles

5.1Polymers

5.1.1Polymers: Functionality & Aesthetics

5.1.2Polymers: Environment & Ethics

5.1.3Polymers: Sources, Origins & Properties

5.1.4Polymers: Forces & Stresses

5.1.5Polymers: Ecological & Social Footprint

5.1.6Polymers: The Six R's

5.2Polymer Categories

5.2.1Categories of Polymers

5.2.2Thermoforming Polymers

5.2.3Thermosetting Polymers

5.3Polymer Forms

5.3.1Polymers: Stock Forms

5.3.2Polymers: Shape & Form

5.4Polymer Production, Techniques & Quality Control

5.4.1Polymers: Scales of Production

5.4.2Polymers: Specialist Techniques & Processes

5.4.3Polymers: Quality Control Systems: Tolerance

5.4.4Polymers: Finishes

6Textiles: Specialist Technical Principles

6.1Textile Materials

6.1.1Origin of Textiles

6.1.2Textile Industry

6.2Selection of Materials

6.2.1Natural Fibres

6.2.2Synthetic Fibres

6.2.3Environmental Concerns

6.2.4Environmental Impact

6.2.5Ethical Challenges

6.3Forces & Stresses

6.3.1Forces & Stresses

6.4Ecological & Social Footprint

6.4.1Ecological Footprint

6.4.2Social Footprint

6.4.3Addressing Ecological & Social Footprints

6.4.4The Six R's

6.4.5Labour Conditions

6.4.6Social Issues

6.4.7Addressing Social Issues

7Designing & Making Principles

7.1Investigation & Data

7.1.1Iterative Design

7.1.2Primary & Secondary Data

7.1.3Market Research

7.1.4Ergonomics

7.1.5Specifications

7.1.6End of Topic Test - Investigation & Data

7.1.7Exam-Style Questions - Specifications

7.2Environmental, Social & Economic Challenges

7.2.1Challenges

7.2.2Your Research

7.3The Work of Others

7.3.1Designers

7.3.2Architects

7.3.3Product Design

7.3.4Industrial Designers

7.3.5Product Design Companies

7.3.6Textile Design Companies

7.3.7End of Topic Test - The Work of Others

7.4Design Strategies

7.4.1Design Strategies

7.5Communication of Design Ideas

7.5.1Design Communication

7.6Prototype Development

7.6.1Prototype Development

7.7Selection of Materials

7.7.1Materials

7.8Tolerances

7.8.1Tolerances

7.9Material Management

7.9.1Managing Material

7.9.2Tools

7.10Specialist Equipment

7.10.1Health & Safety

7.11Specialist Techniques & Processes

7.11.1Specialist Techniques & Processes

7.11.2Surface Finishes

7.11.3End of Topic Test - Designing & Making

Jump to other topics