4.9.1

Alternating Currents

Test yourself

Alternating Current

Just like voltage, current can alternate (i.e. switch directions).

Illustrative background for Alternating current Illustrative background for Alternating current  ?? "content

Alternating current

  • Current flow can change over time just like voltage.
  • Alternating current goes like a sine wave.
    • This means that current oscillates from one positive value to the same negative value.
Illustrative background for Measurement Illustrative background for Measurement  ?? "content

Measurement

  • The peak to peak value is double the maximum positive value.
  • The current has a root mean squared value that is calculated as:
    • Irms=I/2{I_{rms}}=I/\sqrt{2}

Oscilloscopes

The Mains supply is alternating current (a.c). An oscilloscope is a convenient way of measuring the amplitude and period of a.c. supplies.

Illustrative background for ScreenIllustrative background for Screen ?? "content

Screen

  • The screen on an oscilloscope displays the p.d. across the input terminals as a function of time (i.e. a sine wave for mains a.c).
Illustrative background for Time-baseIllustrative background for Time-base ?? "content

Time-base

  • This is the control to change the x-axis scale of the waveform.
  • The setting changes the amount of time per division across the screen.
    • A time base of 10 ms per division displaying 50 Hz mains would record a complete cycle of the waveform every 2 divisions across the time-axis. (Since the period of the mains p.d. is 1/50 = 0.020 s.)
Illustrative background for Y-gain or y-scaleIllustrative background for Y-gain or y-scale ?? "content

Y-gain or y-scale

  • This sets how much p.d. is displayed for each vertical division.
  • A y-gain of 5V per division would record a d.c p.d. of +20V as a horizontal line that was 4 divisions above the time axis of the display.
Illustrative background for ExampleIllustrative background for Example ?? "content

Example

  • In this oscilloscope trace, the period of the wave is 4 squares across.
    • The time base setting is 5 ms per division, which means that the period of the wave is 5 × 4 = 20 ms.
Illustrative background for Example cont.Illustrative background for Example cont. ?? "content

Example cont.

  • The peak-to-peak voltage is 6 squares. This is the vertical measurement from the top of the wave to the bottom of the wave.
    • The y-gain setting is 100 V per division, so the peak to peak voltage is 600 V.
    • The peak voltage is the vertical measurement from the 0V line to the peak. In this case, the peak voltage is 300 V.

Jump to other topics

1Space, Time & Motion

2The Particulate Nature of Matter

3Wave Behaviour

4Fields

4.1Circular Motion

4.2Newton's Law of Gravitation

4.3Fields

4.4Fields at Work

4.5Electric Fields

4.6Magnetic Effect of Electric Currents

4.7Heating Effect of Currents

4.8Electromagnetic Induction

4.9Power Generation & Transmission

4.10Capacitance

5Nuclear & Quantum Physics

6Measurements

Unlock your full potential with Seneca Premium

  • Unlimited access to 10,000+ open-ended exam questions

  • Mini-mock exams based on your study history

  • Unlock 800+ premium courses & e-books

Get started with Seneca Premium