Seneca

Network Hardware

Computer Science: OCR GCSE, topic 1.3.13

Network Hardware

We need a wide variety of different hardware to build an effective network.

Network Interface Controller

Network Interface Controller

  • A NIC provides a connection between the device and the network.
  • The NIC will take a different form based on the transmission media used.
  • For example:
  • The NIC will usually have an RJ45 port for wired networks.
  • The NIC will have a radio transmitter/receiver for wireless networks.
  • Nowadays, most NICs are built directly into the motherboard of a computer.
Switch

Switch

  • A switch connects together several devices to form a wired network.
  • Each computer on the network has its own unique address, called a Media Access Control (MAC) address.
  • When data is sent on the network, it includes the sender and recipient address.
  • The switch learns the MAC addresses of the devices connected to it.
  • So the switch can send the data to the intended destination only.
Router

Router

  • A router is a piece of hardware which connects networks together.
  • Routers work by inspecting the destination Internet Protocol (IP) address of the data being sent.
  • Routers determine if the data belongs to the local network.
  • If the data does not belong to the local network, it will be sent to the connected network.
Wireless Access Point (WAP)

Wireless Access Point (WAP)

  • A WAP is a piece of hardware which connects to a switch.
  • WAPs allow WiFi devices to connect to the network.
  • WAPs broadcast an SSID (network name) so that wireless devices know which network to join.
  • WAPs must use encryption and authentication so that unauthorised individuals do not take advantage of the network.

Test yourself on Network Hardware

  • Which of the following are pieces of networking hardware?

  • Why is it important that a WAP uses encryption and authentication?

  • A wireless access point is set up without encryption or authentication. What is a likely consequence of this?

  • A technician adds WiFi access to an office network that already uses a switch to connect wired computers. Which piece of hardware should be connected to the switch to provide this WiFi access?

Practise this topic for free