Source: https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-10-1-health-and-safety [Revision notes](https://senecalearning.com/en-gb/revision-notes.md) › [GCSE](https://senecalearning.com/en-gb/revision-notes/gcse.md) › [Design & Technology](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology.md) › [AQA](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa.md) › Health & Safety # Health & Safety Design & Technology: AQA GCSE, topic 7.10.1 ## Health and Safety In Design Technology you may need to use tools and equipment that are specialist to your chosen area. You should always consult with your teacher when using specialist tools and equipment. ### Health and Safety ![Health and Safety](https://image-v2.cdn.app.senecalearning.com/courseImages/biology/3.1.2%20-%20Human%20defence%20systems/safety-44424_640%20-%20square.png) - Specialist equipment would be selected to help you achieve a high quality finish and/or to complete a complex job. - You should always refer to data sheets that explain how to use a pieces of equipment correctly and what health and safety considerations need to be taken. ### PPE ![PPE](https://image-v2.cdn.app.senecalearning.com/2018-03/6b7d40a2-ed8c-4b40-9b74-be6f199fd9fe/shutterstock_567718675.jpg) - Ensure you wear the appropriate PPE (personal protective equipment) such as goggles. - Only use equipment you have been shown how to use by your teacher or competent person. ### Inspecting equipment ![Inspecting equipment](https://image-v2.cdn.app.senecalearning.com/2019-04/f3b16d4a-2b82-4181-83b5-3f6669df32d4/tools-repair-.jpg) - Inspect the equipment you are using to make sure it is safe and in good working order. - Some equipment requires it to be tested to a set standard every year. - For example extraction units to reduce dust in the air. - Golden rule: if in doubt - do not use it. ## Risk Assessment and Outsourcing In Design Technology you may need to use tools and equipment that are specialist to your chosen area. You should always consult with your teacher when using specialist tools and equipment. ### Risk assessment ![Risk assessment](https://image-v2.cdn.app.senecalearning.com/2019-04/857dc19a-eda0-447d-8f0a-970d0a6cdd17/drill-tool-wood-builder-.jpg) - All processes and equipment should have a risk assessment which explains the potential dangers and how to reduce the risk of injury. - Each risk assessment will be specific to the equipment, location and users. ### It should... ![It should...](https://image-v2.cdn.app.senecalearning.com/courseImages/chemistry/2.3.4%20Nanotechnology/question-mark-2492009_640-min.jpg) - The risk assessment will: - Identify the risks. - Identify who is at risk. - Evaluate the chances of it happening. - Identify control measures to keep it safe. - Monitor and review dates. ### Outsourcing ![Outsourcing](https://image-v2.cdn.app.senecalearning.com/2018-08/0a49af92-212b-445e-81a1-ba53e01ca02d/phone-call-office-job.jpg) - You may not always have the tools or equipment to complete the task, so may rely on another company that does. - This is known as outsourcing as you are giving them a task to complete outside of your company. - An example might be powder coating a piece of metal or sand blasting work to clean it. ## Test yourself on Health & Safety - What does PPE stand for? - What is NOT an example of PPE (personal protective equipment)? [Practise this topic for free](https://app.senecalearning.com/classroom/course/b4e64de8-a5d1-411b-81e2-aa4e2016e908/section/14ab5d9a-f8e1-4896-9cea-348857cd7bd8/session) - Previous topic: [7.9.2 Tools](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-9-2-tools.md) - Next topic: [7.11.1 Specialist Techniques & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-11-1-specialist-techniques-and-processes.md) ## Design & Technology: AQA GCSE contents ### 1 Core Technical Principles - 1.1 New & Emerging Technologies - [1.1.1 Industry](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-1-industry.md) - [1.1.2 Enterprise](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-2-enterprise.md) - [1.1.3 Sustainability](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-3-sustainability.md) - [1.1.4 People](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-4-people.md) - [1.1.5 Culture & Society](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-5-culture-and-society.md) - [1.1.6 Environment](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-6-environment.md) - [1.1.7 Production Techniques & Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-7-production-techniques-and-systems.md) - [1.1.8 Emerging Technologies & Design](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-8-emerging-technologies-and-design.md) - [1.1.9 End of Topic Test - New & Emerging Technologies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-9-end-of-topic-test-new-and-emerging-technologies.md) - [1.1.10 Exam-Style Questions - Emerging Technologies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-10-exam-style-questions-emerging-technologies.md) - 1.2 Energy Generation & Storage - [1.2.1 Fossil Fuels & Nuclear](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-2-1-fossil-fuels-and-nuclear.md) - [1.2.2 Renewable Energy](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-2-2-renewable-energy.md) - [1.2.3 Energy Storage Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-2-3-energy-storage-systems.md) - 1.3 Developments in New Materials - [1.3.1 Modern Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-1-modern-materials.md) - [1.3.2 Smart Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-2-smart-materials.md) - [1.3.3 Exam-Style Questions - Smart Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-3-exam-style-questions-smart-materials.md) - [1.3.4 Composite Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-4-composite-materials.md) - [1.3.5 Technical Textiles](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-5-technical-textiles.md) - 1.4 Systems Approach to Designing - [1.4.1 Inputs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-1-inputs.md) - [1.4.2 Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-2-processes.md) - [1.4.3 Outputs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-3-outputs.md) - [1.4.4 Looped Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-4-looped-systems.md) - 1.5 Mechanical Devices - [1.5.1 Types of Movement](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-1-types-of-movement.md) - [1.5.2 Levers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-2-levers.md) - [1.5.3 Linkages](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-3-linkages.md) - [1.5.4 Rotary Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-4-rotary-systems.md) - [1.5.5 End of Topic Test - Designing & Mechanical Devices](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-5-end-of-topic-test-designing-and-mechanical-devices.md) - 1.6 Materials Categories - [1.6.1 Timbers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-1-timbers.md) - [1.6.2 Metals & Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-2-metals-and-alloys.md) - [1.6.3 Metals & Alloys 2](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-3-metals-and-alloys-2.md) - [1.6.4 Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-4-polymers.md) - [1.6.5 Polymer Types](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-5-polymer-types.md) - [1.6.6 Textiles](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-6-textiles.md) - [1.6.7 Textile Types: Fibres](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-7-textile-types-fibres.md) - [1.6.8 Textile Types: Weave](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-8-textile-types-weave.md) - [1.6.9 Paper & Boards](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-9-paper-and-boards.md) - 1.7 Material Properties - [1.7.1 Physical & Working Properties](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-7-1-physical-and-working-properties.md) - [1.7.2 End of Topic Test - Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-7-2-end-of-topic-test-materials.md) - [1.7.3 Exam-Style Questions - Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-7-3-exam-style-questions-materials.md) ### 2 Paper & Board: Specialist Technical Principles - 2.1 Selection of Materials - [2.1.1 Paper & Boards](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-1-1-paper-and-boards.md) - [2.1.2 Working with Paper & Boards](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-1-2-working-with-paper-and-boards.md) - 2.2 Paper & Board: Forces & Stresses - [2.2.1 Paper & Board: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-2-1-paper-and-board-forces-and-stresses.md) - [2.2.2 Cardboard & Paper](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-2-2-cardboard-and-paper.md) - 2.3 Paper & Board: Ecological & Social Footprint - [2.3.1 Paper & Board: Ecological & Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-3-1-paper-and-board-ecological-and-social-footprint.md) - [2.3.2 Paper & Board: The Six Rs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-3-2-paper-and-board-the-six-rs.md) - [2.3.3 Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-3-3-social-issues.md) - 2.4 Paper & Board: Sources & Origins - [2.4.1 Paper & Board](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-4-1-paper-and-board.md) - [2.4.2 End of Topic Test - Paper & Board](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-4-2-end-of-topic-test-paper-and-board.md) - 2.5 Paper & Board: Using Materials - [2.5.1 Paper & Board: Properties of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-5-1-paper-and-board-properties-of-materials.md) - [2.5.2 Paper & Board: Modification of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-5-2-paper-and-board-modification-of-materials.md) - [2.5.3 Paper & Board: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-5-3-paper-and-board-shape-and-form.md) - 2.6 Paper & Board: Stock Forms, Types & Sizes - [2.6.1 Paper & Board: Forms](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-1-paper-and-board-forms.md) - [2.6.2 Paper & Board: Types](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-2-paper-and-board-types.md) - [2.6.3 Paper & Board: Sizes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-3-paper-and-board-sizes.md) - [2.6.4 Paper & Board: Standards Components](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-4-paper-and-board-standards-components.md) - 2.7 Paper & Board: Scales of Production - [2.7.1 Paper & Board: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-7-1-paper-and-board-scales-of-production.md) - [2.7.2 Exam-Style Questions - Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-7-2-exam-style-questions-scales-of-production.md) - 2.8 Paper & Board: Specialist Techniques & Processes - [2.8.1 Paper & Board: Techniques & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-8-1-paper-and-board-techniques-and-processes.md) - [2.8.2 Paper & Board: Quality Control](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-8-2-paper-and-board-quality-control.md) - 2.9 Paper & Board: Surface Treatments & Finishes - [2.9.1 Paper & Board: Surface Treatments & Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-9-1-paper-and-board-surface-treatments-and-finishes.md) - [2.9.2 End of Topic Test - Specialist Techniques](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-9-2-end-of-topic-test-specialist-techniques.md) ### 3 Timber: Specialist Technical Principles - 3.1 Timber: Selection of Materials - [3.1.1 Timber Based Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-1-1-timber-based-materials.md) - [3.1.2 Timber: Environment & Ethics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-1-2-timber-environment-and-ethics.md) - 3.2 Timber: Forces & Stresses - [3.2.1 Timber: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-2-1-timber-forces-and-stresses.md) - [3.2.2 Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-2-2-timber.md) - 3.3 Timber: Ecological & Social Footprint - [3.3.1 Timber: Ecological & Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-1-timber-ecological-and-social-footprint.md) - [3.3.2 Timber: The Six Rs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-2-timber-the-six-rs.md) - [3.3.3 Timber: Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-3-timber-social-issues.md) - [3.3.4 Exam-Style Questions - Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-4-exam-style-questions-timber.md) - 3.4 Timber: Sources & Origins - [3.4.1 Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-1-timber.md) - [3.4.2 Timber: Processing & Seasoning](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-2-timber-processing-and-seasoning.md) - [3.4.3 Manufactured Board](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-3-manufactured-board.md) - [3.4.4 End of Topic Test - Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-4-end-of-topic-test-timber.md) - 3.5 Timber: Using Materials - [3.5.1 Timber: Properties of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-1-timber-properties-of-materials.md) - [3.5.2 Timber: Modification of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-2-timber-modification-of-materials.md) - [3.5.3 Timber: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-3-timber-shape-and-form.md) - [3.5.4 Timber: Shape & Form 2](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-4-timber-shape-and-form-2.md) - 3.6 Timber: Stock Forms, Types & Sizes - [3.6.1 Timber: Stock Forms, Types & Sizes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-6-1-timber-stock-forms-types-and-sizes.md) - 3.7 Timber: Scales of Production - [3.7.1 Timber: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-7-1-timber-scales-of-production.md) - 3.8 Timber: Specialist Techniques & Processes - [3.8.1 Timber: Tools, Equipment & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-8-1-timber-tools-equipment-and-processes.md) - [3.8.2 Timber: Tools, Equipment & Processes 2](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-8-2-timber-tools-equipment-and-processes-2.md) - [3.8.3 Timber: Quality Control](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-8-3-timber-quality-control.md) - 3.9 Timber: Surface Treatments & Finishes - [3.9.1 Timber: Surface Treatments](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-9-1-timber-surface-treatments.md) - [3.9.2 Timber: Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-9-2-timber-finishes.md) - [3.9.3 End of Topic Test - Specialist Techniques](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-9-3-end-of-topic-test-specialist-techniques.md) ### 4 Metal: Specialist Technical Principles - 4.1 Metals: Selection of Materials - [4.1.1 Metal-Based Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-1-metal-based-materials.md) - [4.1.2 Ferrous Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-2-ferrous-metals.md) - [4.1.3 Non-Ferrous Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-3-non-ferrous-metals.md) - [4.1.4 Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-4-alloys.md) - [4.1.5 Metals: Environment & Ethics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-5-metals-environment-and-ethics.md) - 4.2 Metals: Forces & Stresses - [4.2.1 Metals: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-2-1-metals-forces-and-stresses.md) - 4.3 Metals: Ecological & Social Footprint - [4.3.1 Metals: Ecological Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-1-metals-ecological-footprint.md) - [4.3.2 Metals: Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-2-metals-social-footprint.md) - [4.3.3 Metals: The Six R's](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-3-metals-the-six-rs.md) - [4.3.4 Metals: Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-4-metals-social-issues.md) - 4.4 Metals: Sources & Origins - [4.4.1 Origins of Metal](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-4-1-origins-of-metal.md) - [4.4.2 Processing Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-4-2-processing-metals.md) - 4.5 Metals: Alloy-Based Materials - [4.5.1 Types of Metal Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-1-types-of-metal-alloys.md) - [4.5.2 Alloying Elements](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-2-alloying-elements.md) - [4.5.3 Properties & Benefits](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-3-properties-and-benefits.md) - [4.5.4 Processing & Fabrication](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-4-processing-and-fabrication.md) - [4.5.5 Applications of Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-5-applications-of-alloys.md) - [4.5.6 Metal Alloys in Industry](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-6-metal-alloys-in-industry.md) - [4.5.7 Applications of Metal Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-7-applications-of-metal-alloys.md) - 4.6 Metals: Using Materials - [4.6.1 Properties of Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-6-1-properties-of-metals.md) - [4.6.2 Modification of Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-6-2-modification-of-metals.md) - [4.6.3 Metals: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-6-3-metals-shape-and-form.md) - 4.7 Metals: Scales of Production - [4.7.1 Metals: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-7-1-metals-scales-of-production.md) - 4.8 Metals: Specialist Techniques & Processes - [4.8.1 Metals: Tools](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-1-metals-tools.md) - [4.8.2 Metals: Tools & Equipment](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-2-metals-tools-and-equipment.md) - [4.8.3 Metals: Cutting, Forming & Machining Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-3-metals-cutting-forming-and-machining-processes.md) - [4.8.4 Metals: Joining, Casting & Heat Treatment Process](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-4-metals-joining-casting-and-heat-treatment-process.md) - 4.9 Metals: Quality Control - [4.9.1 Metals: Quality Control](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-9-1-metals-quality-control.md) - [4.9.2 Metals: Quality Control Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-9-2-metals-quality-control-processes.md) - 4.10 Metals: Surface Treatments & Finishes - [4.10.1 Metals: Surface Treatments](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-1-metals-surface-treatments.md) - [4.10.2 Metals: Surface Treatments for Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-2-metals-surface-treatments-for-metals.md) - [4.10.3 Metals: Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-3-metals-finishes.md) - [4.10.4 Metals: Finishing Techniques for Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-4-metals-finishing-techniques-for-metals.md) ### 5 Polymers: Specialist Technical Principles - 5.1 Polymers - [5.1.1 Polymers: Functionality & Aesthetics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-1-polymers-functionality-and-aesthetics.md) - [5.1.2 Polymers: Environment & Ethics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-2-polymers-environment-and-ethics.md) - [5.1.3 Polymers: Sources, Origins & Properties](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-3-polymers-sources-origins-and-properties.md) - [5.1.4 Polymers: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-4-polymers-forces-and-stresses.md) - [5.1.5 Polymers: Ecological & Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-5-polymers-ecological-and-social-footprint.md) - [5.1.6 Polymers: The Six R's](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-6-polymers-the-six-rs.md) - 5.2 Polymer Categories - [5.2.1 Categories of Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-2-1-categories-of-polymers.md) - [5.2.2 Thermoforming Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-2-2-thermoforming-polymers.md) - [5.2.3 Thermosetting Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-2-3-thermosetting-polymers.md) - 5.3 Polymer Forms - [5.3.1 Polymers: Stock Forms](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-3-1-polymers-stock-forms.md) - [5.3.2 Polymers: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-3-2-polymers-shape-and-form.md) - 5.4 Polymer Production, Techniques & Quality Control - [5.4.1 Polymers: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-1-polymers-scales-of-production.md) - [5.4.2 Polymers: Specialist Techniques & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-2-polymers-specialist-techniques-and-processes.md) - [5.4.3 Polymers: Quality Control Systems: Tolerance](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-3-polymers-quality-control-systems-tolerance.md) - [5.4.4 Polymers: Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-4-polymers-finishes.md) ### 6 Textiles: Specialist Technical Principles - 6.1 Textile Materials - [6.1.1 Origin of Textiles](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-1-1-origin-of-textiles.md) - [6.1.2 Textile Industry](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-1-2-textile-industry.md) - 6.2 Selection of Materials - [6.2.1 Natural Fibres](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-1-natural-fibres.md) - [6.2.2 Synthetic Fibres](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-2-synthetic-fibres.md) - [6.2.3 Environmental Concerns](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-3-environmental-concerns.md) - [6.2.4 Environmental Impact](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-4-environmental-impact.md) - [6.2.5 Ethical Challenges](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-5-ethical-challenges.md) - 6.3 Forces & Stresses - [6.3.1 Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-3-1-forces-and-stresses.md) - 6.4 Ecological & Social Footprint - [6.4.1 Ecological Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-1-ecological-footprint.md) - [6.4.2 Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-2-social-footprint.md) - [6.4.3 Addressing Ecological & Social Footprints](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-3-addressing-ecological-and-social-footprints.md) - [6.4.4 The Six R's](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-4-the-six-rs.md) - [6.4.5 Labour Conditions](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-5-labour-conditions.md) - [6.4.6 Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-6-social-issues.md) - [6.4.7 Addressing Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-7-addressing-social-issues.md) ### 7 Designing & Making Principles - 7.1 Investigation & Data - [7.1.1 Iterative Design](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-1-iterative-design.md) - [7.1.2 Primary & Secondary Data](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-2-primary-and-secondary-data.md) - [7.1.3 Market Research](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-3-market-research.md) - [7.1.4 Ergonomics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-4-ergonomics.md) - [7.1.5 Specifications](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-5-specifications.md) - [7.1.6 End of Topic Test - Investigation & Data](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-6-end-of-topic-test-investigation-and-data.md) - [7.1.7 Exam-Style Questions - Specifications](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-7-exam-style-questions-specifications.md) - 7.2 Environmental, Social & Economic Challenges - [7.2.1 Challenges](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-2-1-challenges.md) - [7.2.2 Your Research](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-2-2-your-research.md) - 7.3 The Work of Others - [7.3.1 Designers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-1-designers.md) - [7.3.2 Architects](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-2-architects.md) - [7.3.3 Product Design](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-3-product-design.md) - [7.3.4 Industrial Designers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-4-industrial-designers.md) - [7.3.5 Product Design Companies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-5-product-design-companies.md) - [7.3.6 Textile Design Companies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-6-textile-design-companies.md) - [7.3.7 End of Topic Test - The Work of Others](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-7-end-of-topic-test-the-work-of-others.md) - 7.4 Design Strategies - [7.4.1 Design Strategies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-4-1-design-strategies.md) - 7.5 Communication of Design Ideas - [7.5.1 Design Communication](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-5-1-design-communication.md) - 7.6 Prototype Development - [7.6.1 Prototype Development](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-6-1-prototype-development.md) - 7.7 Selection of Materials - [7.7.1 Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-7-1-materials.md) - 7.8 Tolerances - [7.8.1 Tolerances](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-8-1-tolerances.md) - 7.9 Material Management - [7.9.1 Managing Material](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-9-1-managing-material.md) - [7.9.2 Tools](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-9-2-tools.md) - 7.10 Specialist Equipment - [7.10.1 Health & Safety](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-10-1-health-and-safety.md) - 7.11 Specialist Techniques & Processes - [7.11.1 Specialist Techniques & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-11-1-specialist-techniques-and-processes.md) - [7.11.2 Surface Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-11-2-surface-finishes.md) - [7.11.3 End of Topic Test - Designing & Making](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-11-3-end-of-topic-test-designing-and-making.md)