Source: https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-1-2-working-with-paper-and-boards [Revision notes](https://senecalearning.com/en-gb/revision-notes.md) › [GCSE](https://senecalearning.com/en-gb/revision-notes/gcse.md) › [Design & Technology](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology.md) › [AQA](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa.md) › Working with Paper & Boards # Working with Paper & Boards Design & Technology: AQA GCSE, topic 2.1.2 ## Working with Paper and Boards Papers and boards are commonly used by many professionals, it is important to know the functions of paper and how we can work with them. This can allow us to make the best choices when selecting paper/boards. ### Availability ![Availability](https://image-v2.cdn.app.senecalearning.com/2018-03/2f71c0c3-7b6b-4a7f-a48a-35a669deecab/shutterstock_185570417.jpg) - Paper and boards are readily available, often found in high street shops, and paper is a common material used by designers. - However, specific paper and board sometimes need to be purchased from paper and board specialist shops. - UK paper companies have diversified to include as many different paper and cardboard types to maximise profits and customer relations. ### Types of availability ![Types of availability](https://image-v2.cdn.app.senecalearning.com/2019-03/88bb7665-4936-4b15-a80d-143a150da168/kitchen-towel-paper-dt-.jpg) - Papers come in the form of rolls, sheet and ply form (this is when papers are layered and in a roll e.g. kitchen and toilet rolls). - You will often see the toilet roll companies using the term ‘2 ply’, this is relevant as it is a prime example of a paper type being produced as a roll and as layers. ### Cost ![Cost](https://image-v2.cdn.app.senecalearning.com/2018-03/f8a9a84c-2fff-465d-9c4b-63454b7f2158/shutterstock_611752889.jpg) - The cost of paper can vary according to size, weight, and quality. - Certain printer brands will demand a higher price as they endorse and use their own paper. - In order to save money, designers and printing companies use thinner and cheaper paper to print drafts before the final print out is used on the desired paper. ### Ethical factors ![Ethical factors](https://image-v2.cdn.app.senecalearning.com/2019-03/c464d445-62df-4737-920a-1520511428c7/fsc-logo-forest-.jpg) - It is important the companies make conscious ethical decisions when producing paper. - FSC permits companies to use their logo if there has been correct and responsible management of the forests. ### Hardwood ![Hardwood](https://image-v2.cdn.app.senecalearning.com/2018-03/9f8e84a3-429d-4ab5-9e7f-db7c1a635019/shutterstock_128768312.jpg) - Another ethical issue is the use of hardwood trees in paper production. - Hardwood trees take longer to grow compared to softwoods which result in further environmental concerns. ## Environment, Aesthetics, and Functionality This is a continued section which looks at the important advantages and drawbacks to papers and board. ### Environmental factors ![Environmental factors](https://image-v2.cdn.app.senecalearning.com/2018-04/7ae57ec8-8e48-46b3-a209-fb30b7ed2a0c/shutterstock_269182169.jpg) - It is important that paper companies are considerate to the environment. Due to the wood being cut down and the amount of paper waste that is created. - Paper companies make conscious efforts to replant trees and to use recycled sources where possible. ### Environmental factors cont. ![Environmental factors cont.](https://image-v2.cdn.app.senecalearning.com/2019-03/70191c2a-93de-4dae-b816-84b6f8664e0d/recycle-.jpg) - Recycled paper has a reduced cost and this is commonly passed down to the customer. - By following the 6Rs it is possible to make an informed choice of the paper/boards that are bought, used and discarded. - (The 6Rs - Reduce, refuse, re-use, repair, recycle and rethink.) ### Aesthetics ![Aesthetics](https://image-v2.cdn.app.senecalearning.com/2018-09/6f6f37cb-cc83-4e2b-9edd-08e40f7c162e/photo-book-brochure-.jpg) - The surface finish can vary with different textures. The use of embossing can raise certain parts of the paper/card, which is great for greeting cards. - Gloss finishes on paper can bring about a high quality feel to photographs. - Foamboard is a perfect example of a material that utilises a good and clean surface finish whilst maintaining the strength of the foam in the middle. ### Functionality ![Functionality](https://image-v2.cdn.app.senecalearning.com/2018-08/e3a65421-eda1-462e-b842-4fb6a88dce66/letter-mail-post.jpg) - Paper and board can be used for a wide range of applications such as modelling, packaging, letter printing, envelopes, greeting cards, and posters. - Paper and board can be modified through techniques such as perforating and creasing to change it from a 2D flat object to a 3D object such as packaging. - Paper and board are easy to work with and often tools are low tech and require less training than other material categories. ## Test yourself on Working with Paper & Boards [Practise this topic for free](https://app.senecalearning.com/classroom/course/b4e64de8-a5d1-411b-81e2-aa4e2016e908/section/753509ed-eb6c-43f3-913d-6928b701922a/session) - Previous topic: [2.1.1 Paper & Boards](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-1-1-paper-and-boards.md) - Next topic: [2.2.1 Paper & Board: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-2-1-paper-and-board-forces-and-stresses.md) ## Design & Technology: AQA GCSE contents ### 1 Core Technical Principles - 1.1 New & Emerging Technologies - [1.1.1 Industry](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-1-industry.md) - [1.1.2 Enterprise](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-2-enterprise.md) - [1.1.3 Sustainability](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-3-sustainability.md) - [1.1.4 People](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-4-people.md) - [1.1.5 Culture & Society](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-5-culture-and-society.md) - [1.1.6 Environment](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-6-environment.md) - [1.1.7 Production Techniques & Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-7-production-techniques-and-systems.md) - [1.1.8 Emerging Technologies & Design](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-8-emerging-technologies-and-design.md) - [1.1.9 End of Topic Test - New & Emerging Technologies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-9-end-of-topic-test-new-and-emerging-technologies.md) - [1.1.10 Exam-Style Questions - Emerging Technologies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-1-10-exam-style-questions-emerging-technologies.md) - 1.2 Energy Generation & Storage - [1.2.1 Fossil Fuels & Nuclear](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-2-1-fossil-fuels-and-nuclear.md) - [1.2.2 Renewable Energy](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-2-2-renewable-energy.md) - [1.2.3 Energy Storage Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-2-3-energy-storage-systems.md) - 1.3 Developments in New Materials - [1.3.1 Modern Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-1-modern-materials.md) - [1.3.2 Smart Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-2-smart-materials.md) - [1.3.3 Exam-Style Questions - Smart Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-3-exam-style-questions-smart-materials.md) - [1.3.4 Composite Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-4-composite-materials.md) - [1.3.5 Technical Textiles](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-3-5-technical-textiles.md) - 1.4 Systems Approach to Designing - [1.4.1 Inputs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-1-inputs.md) - [1.4.2 Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-2-processes.md) - [1.4.3 Outputs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-3-outputs.md) - [1.4.4 Looped Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-4-4-looped-systems.md) - 1.5 Mechanical Devices - [1.5.1 Types of Movement](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-1-types-of-movement.md) - [1.5.2 Levers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-2-levers.md) - [1.5.3 Linkages](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-3-linkages.md) - [1.5.4 Rotary Systems](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-4-rotary-systems.md) - [1.5.5 End of Topic Test - Designing & Mechanical Devices](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-5-5-end-of-topic-test-designing-and-mechanical-devices.md) - 1.6 Materials Categories - [1.6.1 Timbers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-1-timbers.md) - [1.6.2 Metals & Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-2-metals-and-alloys.md) - [1.6.3 Metals & Alloys 2](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-3-metals-and-alloys-2.md) - [1.6.4 Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-4-polymers.md) - [1.6.5 Polymer Types](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-5-polymer-types.md) - [1.6.6 Textiles](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-6-textiles.md) - [1.6.7 Textile Types: Fibres](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-7-textile-types-fibres.md) - [1.6.8 Textile Types: Weave](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-8-textile-types-weave.md) - [1.6.9 Paper & Boards](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-6-9-paper-and-boards.md) - 1.7 Material Properties - [1.7.1 Physical & Working Properties](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-7-1-physical-and-working-properties.md) - [1.7.2 End of Topic Test - Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-7-2-end-of-topic-test-materials.md) - [1.7.3 Exam-Style Questions - Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/1-7-3-exam-style-questions-materials.md) ### 2 Paper & Board: Specialist Technical Principles - 2.1 Selection of Materials - [2.1.1 Paper & Boards](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-1-1-paper-and-boards.md) - [2.1.2 Working with Paper & Boards](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-1-2-working-with-paper-and-boards.md) - 2.2 Paper & Board: Forces & Stresses - [2.2.1 Paper & Board: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-2-1-paper-and-board-forces-and-stresses.md) - [2.2.2 Cardboard & Paper](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-2-2-cardboard-and-paper.md) - 2.3 Paper & Board: Ecological & Social Footprint - [2.3.1 Paper & Board: Ecological & Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-3-1-paper-and-board-ecological-and-social-footprint.md) - [2.3.2 Paper & Board: The Six Rs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-3-2-paper-and-board-the-six-rs.md) - [2.3.3 Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-3-3-social-issues.md) - 2.4 Paper & Board: Sources & Origins - [2.4.1 Paper & Board](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-4-1-paper-and-board.md) - [2.4.2 End of Topic Test - Paper & Board](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-4-2-end-of-topic-test-paper-and-board.md) - 2.5 Paper & Board: Using Materials - [2.5.1 Paper & Board: Properties of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-5-1-paper-and-board-properties-of-materials.md) - [2.5.2 Paper & Board: Modification of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-5-2-paper-and-board-modification-of-materials.md) - [2.5.3 Paper & Board: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-5-3-paper-and-board-shape-and-form.md) - 2.6 Paper & Board: Stock Forms, Types & Sizes - [2.6.1 Paper & Board: Forms](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-1-paper-and-board-forms.md) - [2.6.2 Paper & Board: Types](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-2-paper-and-board-types.md) - [2.6.3 Paper & Board: Sizes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-3-paper-and-board-sizes.md) - [2.6.4 Paper & Board: Standards Components](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-6-4-paper-and-board-standards-components.md) - 2.7 Paper & Board: Scales of Production - [2.7.1 Paper & Board: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-7-1-paper-and-board-scales-of-production.md) - [2.7.2 Exam-Style Questions - Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-7-2-exam-style-questions-scales-of-production.md) - 2.8 Paper & Board: Specialist Techniques & Processes - [2.8.1 Paper & Board: Techniques & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-8-1-paper-and-board-techniques-and-processes.md) - [2.8.2 Paper & Board: Quality Control](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-8-2-paper-and-board-quality-control.md) - 2.9 Paper & Board: Surface Treatments & Finishes - [2.9.1 Paper & Board: Surface Treatments & Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-9-1-paper-and-board-surface-treatments-and-finishes.md) - [2.9.2 End of Topic Test - Specialist Techniques](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/2-9-2-end-of-topic-test-specialist-techniques.md) ### 3 Timber: Specialist Technical Principles - 3.1 Timber: Selection of Materials - [3.1.1 Timber Based Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-1-1-timber-based-materials.md) - [3.1.2 Timber: Environment & Ethics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-1-2-timber-environment-and-ethics.md) - 3.2 Timber: Forces & Stresses - [3.2.1 Timber: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-2-1-timber-forces-and-stresses.md) - [3.2.2 Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-2-2-timber.md) - 3.3 Timber: Ecological & Social Footprint - [3.3.1 Timber: Ecological & Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-1-timber-ecological-and-social-footprint.md) - [3.3.2 Timber: The Six Rs](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-2-timber-the-six-rs.md) - [3.3.3 Timber: Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-3-timber-social-issues.md) - [3.3.4 Exam-Style Questions - Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-3-4-exam-style-questions-timber.md) - 3.4 Timber: Sources & Origins - [3.4.1 Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-1-timber.md) - [3.4.2 Timber: Processing & Seasoning](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-2-timber-processing-and-seasoning.md) - [3.4.3 Manufactured Board](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-3-manufactured-board.md) - [3.4.4 End of Topic Test - Timber](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-4-4-end-of-topic-test-timber.md) - 3.5 Timber: Using Materials - [3.5.1 Timber: Properties of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-1-timber-properties-of-materials.md) - [3.5.2 Timber: Modification of Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-2-timber-modification-of-materials.md) - [3.5.3 Timber: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-3-timber-shape-and-form.md) - [3.5.4 Timber: Shape & Form 2](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-5-4-timber-shape-and-form-2.md) - 3.6 Timber: Stock Forms, Types & Sizes - [3.6.1 Timber: Stock Forms, Types & Sizes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-6-1-timber-stock-forms-types-and-sizes.md) - 3.7 Timber: Scales of Production - [3.7.1 Timber: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-7-1-timber-scales-of-production.md) - 3.8 Timber: Specialist Techniques & Processes - [3.8.1 Timber: Tools, Equipment & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-8-1-timber-tools-equipment-and-processes.md) - [3.8.2 Timber: Tools, Equipment & Processes 2](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-8-2-timber-tools-equipment-and-processes-2.md) - [3.8.3 Timber: Quality Control](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-8-3-timber-quality-control.md) - 3.9 Timber: Surface Treatments & Finishes - [3.9.1 Timber: Surface Treatments](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-9-1-timber-surface-treatments.md) - [3.9.2 Timber: Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-9-2-timber-finishes.md) - [3.9.3 End of Topic Test - Specialist Techniques](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/3-9-3-end-of-topic-test-specialist-techniques.md) ### 4 Metal: Specialist Technical Principles - 4.1 Metals: Selection of Materials - [4.1.1 Metal-Based Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-1-metal-based-materials.md) - [4.1.2 Ferrous Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-2-ferrous-metals.md) - [4.1.3 Non-Ferrous Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-3-non-ferrous-metals.md) - [4.1.4 Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-4-alloys.md) - [4.1.5 Metals: Environment & Ethics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-1-5-metals-environment-and-ethics.md) - 4.2 Metals: Forces & Stresses - [4.2.1 Metals: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-2-1-metals-forces-and-stresses.md) - 4.3 Metals: Ecological & Social Footprint - [4.3.1 Metals: Ecological Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-1-metals-ecological-footprint.md) - [4.3.2 Metals: Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-2-metals-social-footprint.md) - [4.3.3 Metals: The Six R's](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-3-metals-the-six-rs.md) - [4.3.4 Metals: Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-3-4-metals-social-issues.md) - 4.4 Metals: Sources & Origins - [4.4.1 Origins of Metal](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-4-1-origins-of-metal.md) - [4.4.2 Processing Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-4-2-processing-metals.md) - 4.5 Metals: Alloy-Based Materials - [4.5.1 Types of Metal Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-1-types-of-metal-alloys.md) - [4.5.2 Alloying Elements](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-2-alloying-elements.md) - [4.5.3 Properties & Benefits](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-3-properties-and-benefits.md) - [4.5.4 Processing & Fabrication](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-4-processing-and-fabrication.md) - [4.5.5 Applications of Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-5-applications-of-alloys.md) - [4.5.6 Metal Alloys in Industry](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-6-metal-alloys-in-industry.md) - [4.5.7 Applications of Metal Alloys](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-5-7-applications-of-metal-alloys.md) - 4.6 Metals: Using Materials - [4.6.1 Properties of Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-6-1-properties-of-metals.md) - [4.6.2 Modification of Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-6-2-modification-of-metals.md) - [4.6.3 Metals: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-6-3-metals-shape-and-form.md) - 4.7 Metals: Scales of Production - [4.7.1 Metals: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-7-1-metals-scales-of-production.md) - 4.8 Metals: Specialist Techniques & Processes - [4.8.1 Metals: Tools](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-1-metals-tools.md) - [4.8.2 Metals: Tools & Equipment](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-2-metals-tools-and-equipment.md) - [4.8.3 Metals: Cutting, Forming & Machining Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-3-metals-cutting-forming-and-machining-processes.md) - [4.8.4 Metals: Joining, Casting & Heat Treatment Process](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-8-4-metals-joining-casting-and-heat-treatment-process.md) - 4.9 Metals: Quality Control - [4.9.1 Metals: Quality Control](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-9-1-metals-quality-control.md) - [4.9.2 Metals: Quality Control Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-9-2-metals-quality-control-processes.md) - 4.10 Metals: Surface Treatments & Finishes - [4.10.1 Metals: Surface Treatments](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-1-metals-surface-treatments.md) - [4.10.2 Metals: Surface Treatments for Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-2-metals-surface-treatments-for-metals.md) - [4.10.3 Metals: Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-3-metals-finishes.md) - [4.10.4 Metals: Finishing Techniques for Metals](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/4-10-4-metals-finishing-techniques-for-metals.md) ### 5 Polymers: Specialist Technical Principles - 5.1 Polymers - [5.1.1 Polymers: Functionality & Aesthetics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-1-polymers-functionality-and-aesthetics.md) - [5.1.2 Polymers: Environment & Ethics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-2-polymers-environment-and-ethics.md) - [5.1.3 Polymers: Sources, Origins & Properties](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-3-polymers-sources-origins-and-properties.md) - [5.1.4 Polymers: Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-4-polymers-forces-and-stresses.md) - [5.1.5 Polymers: Ecological & Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-5-polymers-ecological-and-social-footprint.md) - [5.1.6 Polymers: The Six R's](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-1-6-polymers-the-six-rs.md) - 5.2 Polymer Categories - [5.2.1 Categories of Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-2-1-categories-of-polymers.md) - [5.2.2 Thermoforming Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-2-2-thermoforming-polymers.md) - [5.2.3 Thermosetting Polymers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-2-3-thermosetting-polymers.md) - 5.3 Polymer Forms - [5.3.1 Polymers: Stock Forms](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-3-1-polymers-stock-forms.md) - [5.3.2 Polymers: Shape & Form](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-3-2-polymers-shape-and-form.md) - 5.4 Polymer Production, Techniques & Quality Control - [5.4.1 Polymers: Scales of Production](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-1-polymers-scales-of-production.md) - [5.4.2 Polymers: Specialist Techniques & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-2-polymers-specialist-techniques-and-processes.md) - [5.4.3 Polymers: Quality Control Systems: Tolerance](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-3-polymers-quality-control-systems-tolerance.md) - [5.4.4 Polymers: Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/5-4-4-polymers-finishes.md) ### 6 Textiles: Specialist Technical Principles - 6.1 Textile Materials - [6.1.1 Origin of Textiles](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-1-1-origin-of-textiles.md) - [6.1.2 Textile Industry](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-1-2-textile-industry.md) - 6.2 Selection of Materials - [6.2.1 Natural Fibres](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-1-natural-fibres.md) - [6.2.2 Synthetic Fibres](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-2-synthetic-fibres.md) - [6.2.3 Environmental Concerns](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-3-environmental-concerns.md) - [6.2.4 Environmental Impact](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-4-environmental-impact.md) - [6.2.5 Ethical Challenges](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-2-5-ethical-challenges.md) - 6.3 Forces & Stresses - [6.3.1 Forces & Stresses](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-3-1-forces-and-stresses.md) - 6.4 Ecological & Social Footprint - [6.4.1 Ecological Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-1-ecological-footprint.md) - [6.4.2 Social Footprint](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-2-social-footprint.md) - [6.4.3 Addressing Ecological & Social Footprints](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-3-addressing-ecological-and-social-footprints.md) - [6.4.4 The Six R's](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-4-the-six-rs.md) - [6.4.5 Labour Conditions](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-5-labour-conditions.md) - [6.4.6 Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-6-social-issues.md) - [6.4.7 Addressing Social Issues](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/6-4-7-addressing-social-issues.md) ### 7 Designing & Making Principles - 7.1 Investigation & Data - [7.1.1 Iterative Design](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-1-iterative-design.md) - [7.1.2 Primary & Secondary Data](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-2-primary-and-secondary-data.md) - [7.1.3 Market Research](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-3-market-research.md) - [7.1.4 Ergonomics](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-4-ergonomics.md) - [7.1.5 Specifications](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-5-specifications.md) - [7.1.6 End of Topic Test - Investigation & Data](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-6-end-of-topic-test-investigation-and-data.md) - [7.1.7 Exam-Style Questions - Specifications](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-1-7-exam-style-questions-specifications.md) - 7.2 Environmental, Social & Economic Challenges - [7.2.1 Challenges](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-2-1-challenges.md) - [7.2.2 Your Research](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-2-2-your-research.md) - 7.3 The Work of Others - [7.3.1 Designers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-1-designers.md) - [7.3.2 Architects](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-2-architects.md) - [7.3.3 Product Design](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-3-product-design.md) - [7.3.4 Industrial Designers](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-4-industrial-designers.md) - [7.3.5 Product Design Companies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-5-product-design-companies.md) - [7.3.6 Textile Design Companies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-6-textile-design-companies.md) - [7.3.7 End of Topic Test - The Work of Others](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-3-7-end-of-topic-test-the-work-of-others.md) - 7.4 Design Strategies - [7.4.1 Design Strategies](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-4-1-design-strategies.md) - 7.5 Communication of Design Ideas - [7.5.1 Design Communication](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-5-1-design-communication.md) - 7.6 Prototype Development - [7.6.1 Prototype Development](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-6-1-prototype-development.md) - 7.7 Selection of Materials - [7.7.1 Materials](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-7-1-materials.md) - 7.8 Tolerances - [7.8.1 Tolerances](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-8-1-tolerances.md) - 7.9 Material Management - [7.9.1 Managing Material](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-9-1-managing-material.md) - [7.9.2 Tools](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-9-2-tools.md) - 7.10 Specialist Equipment - [7.10.1 Health & Safety](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-10-1-health-and-safety.md) - 7.11 Specialist Techniques & Processes - [7.11.1 Specialist Techniques & Processes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-11-1-specialist-techniques-and-processes.md) - [7.11.2 Surface Finishes](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-11-2-surface-finishes.md) - [7.11.3 End of Topic Test - Designing & Making](https://senecalearning.com/en-gb/revision-notes/gcse/design-and-technology/aqa/7-11-3-end-of-topic-test-designing-and-making.md)